Part Number: 788 011 007
Between wear and tear and age, the edge of your overlocker’s blades can lose their cutting surface. While most can be sharpened at least once, it can significantly delay your project. To prevent this from occurring, it is recommended to have at least one spare blade on hand. For this reason, we have the full range of Janome Overlocker blades available for purchase. These blades differ from model to model, so make sure to check your machine’s model number and compare the fixture on your current blade.
This blade is designed to fit models:
1110DX, 204D, 634D, 544D, 644D, 664, 664 PRO, 204D MyLock, 434D, Harmony, 8002D/X, 8004D, 9102DX
How to change the blades on an overlocker:
When installing new knives on your overlocker just remember this simple rule. For the lower blade, ensure that the blade is screwed into the overlocker with the cutting edge of the blade at the same height as the needle plate. While for the upper blade, hold the compression spring in while initially screwing the upper blade in (releasing when your screw is correctly threaded).
Overlocker Blade Storage:
Like all metal, overlocker blades are suspectable to corrosion. To remove the chance of this occurring on your blades (both on the machine and your spares) coat the blade in a fine sewing machine oil or silicone spray when not in use for a long period.