Janome DM7200

Choose stitches and personalise your work

Direct selection keys put everyday stitches within easy reach. Use the detachable reference chart to find decorative patterns and lettering. Adjust stitch width up to 7 mm and length up to 5 mm for suitable stitches.

Choose from 12 buttonhole styles and an eyelet hole for garment details. Elongate selected satin stitches up to five times to vary their appearance. The English and European alphabet adds names and messages to your sewing. Combine up to 50 characters or stitch patterns with the memory function.

Keep useful controls close at hand

Set the pace with the speed slider, up to 820 stitches per minute. The start/stop button lets you sew without the foot control. Needle up/down helps you stop with the needle positioned for your next step.

Use reverse or the auto-lock function to secure appropriate stitches. The cutter memory function can trim threads at the end of a programmed sequence.

Prepare your fabric and thread

The built-in needle threader helps with threading the needle eye. The Easy Set top-loading bobbin guides the thread through a channel, so you can begin without drawing up the bobbin thread by hand.

Six levels of foot pressure and manual thread tension let you adjust for the fabric. The seven-piece feed dog moves it through the machine. Test the actual layers on an offcut before starting your project.

Support larger projects and smaller pieces

Attach the included extension table to support quilting and larger pieces of fabric. The quarter-inch foot helps with piecing. Lower the feed dogs for darning or free-motion sewing with a suitable optional foot.

Remove the accessory compartment to expose the free arm for sleeves and cuffs. LED lighting illuminates the sewing area. Store the machine beneath the supplied hard cover.

Seven sewing feet

• Zigzag foot A.
• Overedge foot C.
• Zipper foot E.
• Satin-stitch foot F.
• Blind-hemming foot G.
• Quarter-inch seam foot O.
• Automatic buttonhole foot R and stabiliser plate.

The stabiliser plate supports the fabric during buttonhole sewing. The buttonhole foot can also be used without the plate.

Setup, care and storage

• Four Janome plastic bobbins and a needle set.
• Additional spool pin.
• Two large and two small spool holders.
• Screwdriver, lint brush and seam ripper.
• Foot control and power cable.
• Extension table and hard machine cover.
• Instruction book and instructional DVD.